Bring On The Christmas Lights With These New York City Christmas Lights Tourers

new york christmas lights tour

If you do too, then you should probably follow some of these suggestions to make sure that your light display is as nice as it can be. Even if you live out of state or in another country, there are things you can do to make sure that your display shows up at its best. Here are some tips:

Don’t Leave Your Display Up Overnight

A christmas tree lit up at night

First and foremost, don’t leave your display up overnight. Even though most of the bulbs in a Christmas light show are low-energy versions, they still draw a lot of power. In fact, left alone for a few days, even low-voltage lights can get very warm and bright. That means that while your lights are shining, you might not be able to fully enjoy them because you’ll have to shiver just to see them.

Of course, after all the excitement of leaving your display up has worn off, you’ll need to take care of it properly in order to avoid any unnecessary accidents. For starters, it’s important to unplug Christmas lights whenever they are not in use. You can’t leave them plugged into an extension cord for a long period of time because chances are that they will be getting too hot from all the electricity running through them. As a result, you could potentially burn yourself.

Make Sure That You Do It Right

A christmas tree

When it comes to cleaning your lights, it’s important to make sure that you do it right. The first thing that you need to do is to remove any dirt or debris from the bulb. Then, use a soft cloth to gently wipe the bulb down, paying particular attention to the areas where the wires enter the lights. After you’ve done so, you can apply a clear coat of paint to the bulb in order to keep it looking as good as new.

Before you string the lights around the outside of your home, you have to make sure that they are adequately hung. To ensure that they are mounted properly, you can buy light pole clamps from stores such as Home Depot and Lowe’s. There are also rope clips available on the Internet. Just make sure that they are strong enough to handle the weight of the tree and the lights.

Hang Them Properly

After you have successfully installed the lights, you must next hang them properly. To hang them properly, you need to make sure that the cords aren’t touching each other. To test this, simply bend the cords using a wire bending tool. If the lights touch each other, then you need to remove them and reinstall them again. Be sure to clip the extra wire back in place before you hang the lights back in place.

Finally, before you string the lights along your roof, you have to make sure that they are securely attached to the wires. This is very important to ensure that the lights don’t blow or break as a result of wind pressure. To check, simply twist each wire back and forth. If the lights move back and forth, then you may need to replace some wires. Also, be sure to keep an eye on the lights to ensure that they are not being blown by high winds.

Final Words

A great deal of people decide to purchase these lights online. This is definitely the best way to go because you can browse through all of the available selections in no time at all. Plus, you are likely to find discounted prices online. Just make sure you know what you are buying before placing your order. Also, be sure to read all of the instructions included with your purchase so you know how to install and do it safely. There’s nothing worse than having lights that don’t work and no one will want to have to do it or be around it during the holidays.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter